(1) The pump and water system components must be complete and leak free.
（2）裝置檢查規則：
(2) Safety device inspection rules:
1.液壓系統必須配備裝置，以防止過載和液壓沖擊。溢流閥的調節壓力不得超過液壓泵的額定壓力。
1. The hydraulic system must be equipped with safety devices to prevent overload and hydraulic shock. The regulating pressure of the safety relief valve shall not exceed the rated pressure of the hydraulic pump.
2.自動上料攪拌車側面和背面的混凝土保護罩完好無損。
2. The concrete protective cover on the side and back of the automatic feeding mixer is intact.
3.自動上料攪拌車必須配備滅火設備。
3. Automatic feeding mixer must be equipped with fire fighting equipment.
（3）檢查系統規則。
(3) Check the system rules.
1.氣缸必須與支撐輪良好接觸，并且不得失去控制，移動或明顯變形。
1. The cylinder must be in good contact with the support wheel, and must not lose control, move or deform obviously.
2.混合罐框架的緩沖器不應破裂或損壞?；旌喜?，料斗，主卸料槽和輔助卸料槽的葉片不應明顯磨損或變形。
2. The buffer of mixing tank frame shall not be broken or damaged. The blades of mixing tank, hopper, main discharge tank and auxiliary discharge tank shall not be obviously worn or deformed.
3.攪拌槽，進料斗，主排水槽或輔助排水槽中不得有干凈的混凝土塊。
3. There shall be no clean concrete blocks in the mixing tank, feed hopper, main drainage tank or auxiliary drainage tank.
（4）防洪系統檢查規則：
(4) Flood control system inspection rules:
1.取力器工作平穩，壓力符合設計要求，無泄漏。
1. The power take-off works smoothly, the pressure meets the design requirements, and there is no leakage.
2.液壓系統的組件必須完整，并且系統的工作壓力必須符合手冊的要求。
2. The components of the hydraulic system must be complete, and the working pressure of the system must meet the requirements of the manual.
3.液壓油的類型，質量，數量和使用必須符合相關規定。當熱泵運行時，油溫不得超過80°C，并且管路連接必須可靠。
3. The type, quality, quantity and use of hydraulic oil must comply with relevant regulations. When the heat pump is running, the oil temperature should not exceed 80 ℃ ° C. And the pipeline connection must be reliable.
4.每個防洪組件的運動必須靈活可靠。
4. The movement of each flood control component must be flexible and reliable.
