When operating and using the full-automatic concrete mixer truck, the temperature will naturally rise due to long-term uninterrupted operation, but if the temperature exceeds the temperature that the equipment itself can withstand, the equipment will be damaged to a certain extent. Therefore, if the temperature of the equipment is too high, we must work together.
1.防止發動機過熱：由于環境溫度較高，發動機容易過熱，因此有必要加強對發動機冷卻系統的檢查和維護，例如檢查水箱，恒溫器，和水泵。注意風扇和其他組件，并及時添加它們。裝滿冷卻水。當水溫超過100°C時，請在涼爽的地方停下來冷卻，以怠速運轉發動機，然后打開引擎蓋進行散熱。
1. Prevent the engine from overheating: due to the high ambient temperature, the engine is easy to overheat, so it is necessary to strengthen the inspection and maintenance of the engine cooling system, such as checking the water tank, thermostat and water pump. Pay attention to fans and other components and add them in time. Fill with cooling water. When the water temperature exceeds 100 ° C, please stop in a cool place to cool down, run the engine at idle speed, and then open the hood to dissipate heat.
2.防止發動機爆炸：夏天很熱，溫度可能超過35°C。在這個季節中，零件破舊的汽車更容易發生自然爆炸。因此，準備好。
2. Prevent engine explosion: it is very hot in summer and the temperature may exceed 35 ° C. In this season, cars with worn-out parts are more likely to explode naturally. So get ready.
3.防止損壞汽車漆：當暴露在強烈的陽光下，汽車漆會(huì )老化和起皺。普通的美容蠟具有一定的防曬效果，而汽車蠟則含有硅酮，因此使用壽命更長。紫外線腐蝕涂料，留下黑點。車蠟本身不具有硬度或防紫外線功能，但由于高溫會(huì )很快丟失，因此請盡可能將其停放在涼爽的地方。
3. Prevent damage to the car paint: when exposed to strong sunlight, the car paint will age and wrinkle. Ordinary beauty wax has a certain sunscreen effect, while automobile wax contains silicone, so it has a longer service life. Ultraviolet light corrodes the paint, leaving black spots. The car wax itself has no hardness or UV protection function, but it will be lost quickly due to high temperature, so please park it in a cool place as far as possible.
4.防止輪胎破裂：由于高溫容易破裂。如果溫度過高，則輪胎容易變形，抗拉強度降低。輪胎自身由于異常氣壓，輪胎的老化劣化，性能的劣化以及行駛中的輪胎在諸如硬質金屬的堅硬物體上滾動而突然爆裂。
4. Prevent tire cracking: it is easy to crack due to high temperature. If the temperature is too high, the tire is easy to deform and the tensile strength is reduced. The tire itself suddenly bursts due to abnormal air pressure, aging and deterioration of the tire, deterioration of performance and rolling of the running tire on a hard object such as hard metal.
5.防止發動機潤滑故障。高溫會(huì )降低油的粘度，降低其抗氧化性，并導致潤滑不良。因此，應經常檢查機油的數量和質量，并及時添加或更換。應及時清潔機油濾清器和散熱器，以確保機油不被堵塞，熱量散發良好以及發動機過載。
5. Prevent engine lubrication failure. High temperature will reduce the viscosity of oil, reduce its oxidation resistance, and lead to poor lubrication. Therefore, the quantity and quality of engine oil should be checked frequently and added or replaced in time. The oil filter and radiator should be cleaned in time to ensure that the oil is not blocked, the heat dissipation is good and the engine is overloaded.
6.防止制動器故障：在高溫環境下，制動液會(huì )蒸發并趨于蒸發，從而在制動管路中形成空氣阻力。制動蹄也容易燒蝕，從而導致制動故障。因此，應經常檢查和調整制動系統，并注意在較長的斜坡上停放和干燥制動器，以確保良好的制動性能。如果制動輪轂很熱，則需要停止冷卻，但請勿倒入冷水以防止制動輪轂破裂。
6. Prevent brake failure: in high temperature environment, the brake fluid will evaporate and tend to evaporate, thus forming air resistance in the brake pipeline. Brake shoes are also easy to be ablated, resulting in brake failure. Therefore, check and adjust the braking system frequently, and pay attention to parking and drying the brake on a long slope to ensure good braking performance. If the brake hub is very hot, stop cooling, but do not pour cold water to prevent the brake hub from cracking.
