The factory inspection is the basic guarantee of whether the concrete mixer truck meets the national standards and completes its work tasks. It is also a reliable guarantee for the operation and maintenance of the concrete mixer truck and the personnel around the construction.

1、檢查

1. Inspection

車體的規格需要符合的要求，規格主要參數要符合公示。車身是否堆放雜物，檢查柴油、機油、各種齒輪油、各種助力油、發動機冷卻液和制動液，的液位和滲漏情況。

First of all, the specifications of the car body shall meet the requirements of China, and the main parameters of the specifications shall comply with the public notice. Whether the vehicle body is stacked with sundries, focus on checking the liquid level and leakage of diesel, engine oil, various gear oil, various booster oil, engine coolant and brake fluid.

2、車體

2. Car body

對于外購件需要有生產廠的出廠合格證，而且要符合相關的標準要求，需要經過混凝土攪拌車生產商的檢查，達標后才能使用。對于所有露出的金屬，表面需做防銹，符合相關的要求。

For the purchased parts, the factory certificate of the manufacturer shall be provided, and the relevant standard requirements shall be met. The inspection of the concrete mixer manufacturer shall be carried out before use. For all exposed metal, the surface shall be antirust to meet relevant requirements.

3、構件

3. Components

攪拌車的各構件安裝堅固，各接入部分不能有受損、形變等現象?？傎|(zhì)量的情況下，在坡道上行車不能有混泥土外流現象。車子的排污還要符合的標準。

The components of the mixer truck shall be installed firmly, and the access parts shall not be damaged or deformed. Under the condition of total mass, there should be no concrete outflow when driving on the ramp. The emission of vehicles should also meet Chinese standards.

4、密封

4. Sealing

車體的每一項密封性性能良好，各個突面、管接頭及所有的接入部位均不可有滲水現象。一倆達標的混凝土攪拌車需符合以上這些標準，

Each sealing performance of the car body is good, and no water seepage is allowed on each protruding surface, pipe joint and all connecting parts. One or two qualified concrete mixers must meet these standards,